Run the DJI flight simulator on a windows pc with the following downloads. Install the Win Driver first then the DJI Pc Simulator application. Install the WIN drivers by extracting it and running the installer. Once this is done go ahead and install the PC simulator, making sure to read the manual. (Contains important tips to take note of) Once it is installed, plug your aircraft into your computer via the aircraft’s USB port. Not the camera port. Power on the aircraft, the remote. Once they have connected, start the simulator. Make sure your simulator displays your aircraft’s SN in the console or you may have to restart your aircraft and simulator. Click start simulation and the Display simulation. Once you are in you will be able to do a CSC and start the motors. Make sure your props are off just in case.